| The RGV Gas Vac is an engine powered, water recovery system with pump out. It can be used with either one or two separate pickup devices and is ideal for facilities maintenance contractors who need to collect wash water or for restoration contractors who need to pick up water after a fire or flood. |  | ||
| The unique polyethylene separation tanks are non-corrosive, weigh significantly less than 50 gallon steel drums, and have access to the inside for periodic cleaning & maintenance with a quick lift-off lid. Open the large 1½” valve to purge sludge/solids that settle at the bottom. Each separation tank has an automatic transfer system which pumps the water out to your bulk tank, landscape, or sanitary sewer where permitted, no heavy tipping to dump your tanks. | |||
| (For use with cold water or hot water up to 90°C) | |||
 |
| ||
| RGV40: GAS ENGINE DRIVE VACUUM RECOVERY SYSTEM |
| ||
| PART # | DESCRIPTION | WEIGHT | |
| HYD RGV40V12* | 95 l/min,425 CFM, 14”Hg, 4.8m Lift, 627cc Vanguard Elec. Start | 242 kg | |
| HYD RGV40H12* | 95 l/min,425 CFM, 14”Hg, 4.8m Lift, GX630 Honda Elec. Start | 242 kg | |
Features | Using vaccum tools such as a vacuum arch ATP40 or a Twister Vacuum ANTV5 will increase your efficiency | ||
| •Vacuum and pump out simultaneously and automatically, no loss of suction or lost time dumping tanks | |||
| •12v Transfer pumps require no outside power, completely self contained | |||
| •Recovers up to 90 l/m, use up to 108m total hose length – Use with one or two pickup devices |  | ||
| •Air throttling system allows you to independently control the suction for precise control over pickup devices when using varying lengths of hose | |||
| •2 x 98 litre lightweight non-corrosive polyethylene hexagonal separation tanks w/ 1.5” sludge/solids drain & removable Stainless Steel lids | |||
| •Easy 1 plug connection for transfer pump power and high water level shutdown | |||
| •Debris filters protect pumps and blower motor | |||
| •Large 30 litre fuel tank integrated into frame base while keeping a small footprint | |||
| •Requires 2” diameter vacuum hose 108m max.) and 2” diameter discharge hose (31m max.) | |||
| •Optional: your choice of vacuum berms, recovery surface cleaners, vacuum accessories, see attached pages | |||
| •Main Unit Dimensions & Weight: 44”L x 26”W x 34”H, 425 lbs., Vacuum Tanks: 25″L x 20″ W x 36″H, 24 kg each | |||
| *NOTE: Max hose length 108m, vacuum & discharge hose not included, see Vacuum Options & Accessories | |||
| ca 24 battery required (not included) | |||
 | |||
| RGV GAS ENGINE VACUUM RECOVERY OPTION | |||
| PART# | DESCRIPTION | Weight | |
| HYD ATP36 | Solids/Sand Separation Tank | 28 kg | |
| HYDRO VACUUM® PARTS & ACCESSORIES | |||
| Hydro Vacuum® Recovery Options – All Models | |||
| A MUST have for all new vacuums as a startup bundle & great for anyone wanting to expand the applications of their existing equipment. | |||
| Includes: 1) 25’ Vacuum Hose w/ 2” Cuffs, 1) 50’ Vacuum Hose w/ 2” Cuffs, 1) 12” Vacuum Scupper for 2” Vac Hose, | |||
| 1) 14” Squeegee Tool, 1) Aluminum Carpet Wand w/ 1-1/2” Attachment & 2” to 1-1/2” Adapter for Carpet Wand, | |||
| 3 Pack of Dry Work Filters, 1) 6’ Hydro Dike Water Berm* & 2) 10’ Sand Bag Dams** | |||
| *NOTE: Requires 20lbs of Small Pea Gravel (NOT INCLUDED) **NOTE: Sand Required (NOT INCLUDED) | |||
 | |||
| VACUUM ACCESSORY BUNDLE | |||
| PART# | DESCRIPTION | WT lbs | |
| HYD AFS10 | Vacuum Accessory Bundle | 42 | |
 ATP40 | |||
| VACUUM HOSE & ACCESSORIES | |||
| PART# | DESCRIPTION | WT lbs | |
| ATP40 | 5’ Hydro Vacuum Arch, Fits 2” Vac Hose,75-200CFM Req. | 7.2 | |
| ATP64 | Vacuum Scupper, Fits 1.5” Vac Hose, 6” Wide | 1.6 | |
 ATP75 | ATP75 | Vacuum Scupper, Fits 2” Vac Hose, 12” Wide | 2.8 |
| DHV05 | Cuff, Fits 2” Vacuum Hose | 0.24 | |
| DHV25 | 25’ x 2” Vacuum Hose | 9.2 | |
| DHV50 | 50’ x 2” Vacuum Hose | 18.1 | |
DHV25 | DHV51 | Connector, Fits 2” Vacuum Hose | 0.2 |
| VWV56 | Carpet Wand | 2.1 | |
| VWV61 | Adapter, 1-1/2” to 2” Vacuum Hose | 0.3 | |
 VWV61 | VWV63 | 14″ Squeegee Tool | 1.0 |
 | |||
| WATER CONTAINMENT FILTRATION | |||
| PART# | DESCRIPTION | WT | |
| VFH08 | Filter Housing, 20” x4.5”, 1” Inlet/Outlet, Double O-Ring Seal | 8.15 | |
| VFH03 | Replacement O-Ring, Fits VFH08, Fits VFH08 – 2 Required | 0.01 | |
| VFW04 | Filter Wrench, Fits VFH08 | 2 | |
| VFH10 | Filter, Pleated Carbon, 10 Micron, 20” x 4.5”, Fits VHF08 | 1.65 | |
| VFH07 | Filter, Pleated Polyester, 20 Micron, 20” x 4.5”, Fits VHF08 | 1.7 | |
| VFH25 | Filter, String Wound, 20 Micron, 20” x 4.5”, Fits VHF08 | 2.3 | |
| VFH50 | Filter, String Wound, 50 Micron, 20” x 4.5”, Fits VHF08 | 2.3 | |
| VFB05 | Filter Bag, 7” Diameter x 32” L, 5 Micron | 0.45 | |
| VFB10 | Filter Bag, 7” Diameter x 32” L, 100 Micron | 0.4 | |
| VFB41 | Duo-Flow Dirt Bag, 7” Diameter x 26” L, 400 Micron Mesh Top, | 0.3 | |
| 100 Micron Bottom | |||
| VFBS2 | Replacement Filter Basket, 12” x 9.5”, 1000 Micron, | 0.5 | |
| Fits AZV, RZV & RGV Models | |||
| VFBS8 | Replacement Filter Basket, 8” x 9.5”, 1000 Micron, Fits RPV Models | 0.3 | |
 | |||
| WATER CONTAINMENT ACCESSORIES | |||
| PART# | DESCRIPTION | WT | |
| VB040 | Hydro Carbon Oil Absorption Pillow, 40lb Capacity, 18” x 6” | 1.5 | |
| ZMAT2 | 2’ Sand Bag Dam (Sand Not Included) | 0.8 | |
| ZMAT6 | 10’ Sand Bag Dam (Sand Not Included) | 3.15 | |
| ZMAT7* | 6’ Hydro Dike Water Containment Berm | 1.2 | |
| *NOTE: Requires 20lbs of Pea Small Gravel (Not Included) | |||
 | |||
| RECOVERY MOTOR & PUMPS | |||
| PART# | DESCRIPTION | WT | |
| MEV15 | 5.7” Motor, 2-Stage, 110-120V/9A, Fits All RPV Models | 4.75 | |
| PS120 | Transfer Pump, 12VDC, 5.0 GPM / 45 PSI Max | 6 | |
| PS125 | Transfer Pump, 120VAC, 4.5 GPM / 45 PSI Max | 4 | |
| PS135 | Transfer Pump, 12VDC, 21.0 GPM / 17.4 PSI Max, | 9.7 | |
| PSG14* | Submersible Sump Pump,1/3 HP/ 115VAC/ 4A, 60 GPM Max | 7.1 | |
| *NOTE: Tethered Float Operated w/ Auto-Reset Thermal Overload, 14″ Min. Sump Basin, | |||
| 1-1/4″ Discharge Port | |||
| HYDRO TWISTER® SURFACE CLEANERS | ||||||||
 | ||||||||
| The Contractor Roof Cleaner Hydro Twister® Need to clean a dirty roof? Attach this Roof | ||||||||
| Cleaner to a hot or cold pressure washer to remove algae, mildew, and dirt streaks from a | ||||||||
| roof. Constructed of rust resistant stainless steel with an aluminum spray bar to ensure a long | ||||||||
| life of use, even in corrosive environments. | ||||||||
| CONTRACTOR ROOF CLEANER HYDRO TWISTER® | ||||||||
| 4 Adjustable Casters | ||||||||
| Includes a pressure reduction valve, pressure gauge, non-marking wheels, and a ball valve | ||||||||
| to shut off water. Wheel width and height are adjustable, without tools, for maximum | ||||||||
| impact on a variety of roof styles. | ||||||||
| MODEL | PSI | GPM | DECK | NOZZLES* | TEMP | WT | ||
| ANTR1 | 3000-4000 | 3 – 6 | 24″ | (2) 2.7 | 175°F | 33 kg | ||
| *Note:Nozzles-15° | Industrial | |||||||
 |  |  | ||||||